Acura ZDX Operating Controls 2012 Manual
![Acura ZDX Operating Controls 2012 SUV manual cover](/images/QrQjtoUsSQqIZeOVjgSDJrEY/thumbs/thumb175x175.webp)
To pair your phone, first ensure Bluetooth is enabled on your device. Then, press the "Phone" button on the control panel. Select "Phone Setup" from the display, then choose "Bluetooth Setup" followed by "Pairing". Follow the on-screen instructions to complete the pairing process.
If the navigation system is unresponsive, try restarting the system by turning off the ignition and restarting the vehicle. If the problem persists, check for any blown fuses related to the navigation system. For further assistance, consult your owner's manual or visit a certified Acura technician.
To adjust the seat position, use the controls located on the side of the seat. You can move the seat forward and backward, adjust the seat height, and recline the seatback. Additionally, some models offer lumbar support adjustments for added comfort.
If the keyless entry system is not functioning, first check the battery in the key fob and replace it if necessary. Ensure there is no interference from other electronic devices. If the issue continues, consult the vehicle's manual or contact your Acura dealer for assistance.
To activate cruise control, press the "CRUISE" button on the steering wheel. Once the indicator light appears, accelerate to the desired speed and press the "SET" button. You can adjust the speed using the "RES/ACCEL" or "DECEL/SET" buttons. To deactivate, press the "CANCEL" button or apply the brakes.
Regular maintenance includes checking and cleaning the control buttons, inspecting the electrical connections for corrosion, and ensuring that all moving parts are properly lubricated. Refer to the owner's manual for specific intervals and procedures.
To reset the TPMS, first ensure all tires are inflated to the recommended pressure. Turn on the ignition without starting the engine, then press and hold the TPMS reset button (usually located under the dashboard) until the TPMS indicator blinks twice. Release the button and wait for a few minutes for the system to recalibrate.
Possible causes for air conditioning malfunction include low refrigerant levels, a faulty compressor, or a clogged air filter. Check these components and replace or refill as necessary. If the issue persists, have the system inspected by a qualified technician.
To operate the sunroof, use the overhead controls. Slide the switch rearward to open the sunroof and forward to close it. You can also tilt the sunroof by pressing the switch upwards. Ensure the sunroof is fully closed when exiting the vehicle to prevent water leaks.
If the dashboard lights are not illuminating, first check the dimmer switch to ensure it is not turned down. Inspect the fuse related to the dashboard lights and replace it if necessary. If the problem persists, the issue may require professional diagnosis and repair.