Acura ZDX Operating Controls 2011 Manual
![Acura ZDX Operating Controls 2011 SUV manual cover](/images/PBgRxTVHvTBgNkdqNbcYztdX/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, ensure all tires are correctly inflated, turn the ignition to ON, and press the TPMS button located under the dashboard until the warning light blinks twice.
To pair a phone, enable Bluetooth on your phone, press the "Phone" button on the steering wheel, select "Settings" on the display, choose "Bluetooth Setup", and follow the prompts to add a new device.
Check if the navigation disc is correctly inserted. Restart the system by turning the ignition off and on. If the issue persists, consult the user manual or contact a dealer for assistance.
Open the glove box, remove the retaining arm, and press the sides of the glove box inward to release it. Remove the filter cover, pull out the old filter, and insert the new one with airflow arrows pointing down.
Park the vehicle on a level surface facing a wall 25 feet away. Open the hood, locate the headlight adjustment screws, and turn them to align the beams with the marked horizontal and vertical lines on the wall.
The maintenance schedule includes oil changes every 7,500 miles, tire rotations every 10,000 miles, and brake inspections every 15,000 miles. Refer to the owner's manual for a detailed schedule.
Locate the release handle inside the rear cargo area. Pull the handle to unlock the tailgate, then lift it manually. Check the power liftgate fuse if the issue persists.
Replace the remote battery and ensure it is properly inserted. If the problem continues, try reprogramming the remote or consult a dealer for further diagnostics.
Adjust the seat, mirrors, and steering wheel to your preference. Press the "SET" button, then press and hold the desired memory button (1 or 2) until you hear a beep, indicating the position is stored.
Ensure the vehicle is on a level surface and the engine is turned off. Wait a few minutes after turning off the engine, then pull out the dipstick, wipe it clean, reinsert it fully, and check the oil level.