Acura TSX Tire Pressure Monitoring System 2010 Manual

Acura TSX Tire Pressure Monitoring System 2010 Sedan manual cover
Pages 1
Year 2010
Language(s)
English en

Acura TSX Tire Pressure Monitoring System 2010 Sedan Specification

The Acura TSX 2010 Sedan is equipped with a sophisticated Tire Pressure Monitoring System (TPMS) designed to enhance safety and vehicle performance. The TPMS continuously monitors the air pressure in all four tires and alerts the driver if it detects a significant drop in pressure that may compromise driving stability and safety. The system employs direct TPMS technology, utilizing pressure sensors mounted inside each tire that provide real-time data to the vehicle's onboard computer.

When tire pressure falls below the recommended level, the TPMS triggers a warning light on the instrument panel, alerting the driver to check and inflate the affected tire(s) accordingly. The system is calibrated to the manufacturer's specified tire pressure levels, ensuring optimal vehicle handling, fuel efficiency, and tire longevity.

The sensors operate on a radio frequency and are powered by small, long-lasting batteries, typically designed to last for several years. In addition to monitoring pressure, the TPMS in the Acura TSX 2010 Sedan also helps in maintaining uniform tire wear, contributing to improved traction and stability.

For maintenance, it is recommended to regularly check the TPMS functionality during routine tire inspections and replace the sensor batteries as needed. The Acura TSX 2010 TPMS is an integral part of the vehicle's safety features, providing drivers with peace of mind and contributing to an overall safer driving experience.

Acura TSX Tire Pressure Monitoring System 2010 Sedan F.A.Q.

How do I reset the Tire Pressure Monitoring System on a 2010 Acura TSX?

To reset the TPMS on a 2010 Acura TSX, turn the ignition to the ON position without starting the engine. Press and hold the TPMS button located below the dashboard until the TPMS indicator blinks twice, indicating the system has been reset.

What should I do if the TPMS warning light stays on after inflating my tires?

If the TPMS warning light remains on after inflating your tires to the correct pressure, drive the vehicle for a few minutes at a speed above 28 mph to allow the system to recalibrate. If the light persists, there may be a sensor issue that requires professional inspection.

Can I replace a faulty TPMS sensor myself on my 2010 Acura TSX?

While it is possible to replace a TPMS sensor yourself, it requires specific tools and expertise to avoid damaging the wheel or sensor. It is recommended to have a professional perform the replacement to ensure proper installation and system calibration.

How often should the TPMS be checked or serviced on a 2010 Acura TSX?

The TPMS should be checked regularly as part of routine tire maintenance, ideally every six months or whenever you rotate your tires. Sensors typically last 7-10 years but should be inspected for battery life and physical damage.

What could cause the TPMS light to flash and then stay solid on my Acura TSX?

A flashing TPMS light followed by it staying solid usually indicates a problem with one or more TPMS sensors, such as a dead sensor battery or a malfunctioning sensor. A diagnostic tool is needed to pinpoint the exact issue.

Is it safe to drive my 2010 Acura TSX with the TPMS light on?

While it is possible to drive with the TPMS light on, it is not recommended. The light indicates that one or more tires may be under-inflated, which can affect handling and fuel efficiency, and potentially lead to tire failure. Address the issue as soon as possible.

What is the recommended tire pressure for a 2010 Acura TSX?

The recommended tire pressure for a 2010 Acura TSX is typically 32 psi for both front and rear tires. Always check the sticker on the driver's door jamb for the most accurate information specific to your vehicle.

Can TPMS sensors be reused if I get new tires for my 2010 Acura TSX?

Yes, TPMS sensors can often be reused when getting new tires, provided they are still in good working condition. However, it is a good opportunity to have them checked for wear and battery life during the tire replacement.

How can I tell if a TPMS sensor is bad on my 2010 Acura TSX?

A common sign of a bad TPMS sensor is the warning light on the dashboard. A diagnostic scan by a professional can accurately determine if a sensor is malfunctioning or if the issue is elsewhere in the system.

What tools are needed to check and replace TPMS sensors on a 2010 Acura TSX?

To check and replace TPMS sensors, you typically need a tire pressure gauge, a torque wrench, a valve core removal tool, and potentially a TPMS programming tool. Specialized tools for mounting and dismounting tires may also be necessary.