Acura TSX Sport Base Bluetooth HandsFreeLink 2013 Manual
![Acura TSX Sport Wagon Base Bluetooth HandsFreeLink 2013 Wagon manual cover](/images/cZgdDFlGwoKDiqeIwRtFbiNn/thumbs/thumb175x175.webp)
To pair your phone, enable Bluetooth on your phone, then press the "Phone" button on the steering wheel. Follow the voice prompts to search for the Bluetooth device on your phone, select "HandsFreeLink," and enter the pairing code when prompted.
Ensure that Bluetooth is enabled on your phone and that it is within range of the vehicle. If the issue persists, try deleting the HandsFreeLink profile from your phone and re-pairing the devices.
To clear previously paired phones, access the setup menu by pressing the "Phone" button, then select "Phone Setup" and "Bluetooth Setup." Choose "Delete Device" and follow the prompts to remove the desired phone.
Ensure that you are speaking clearly and at a consistent volume. Background noise can interfere with voice recognition, so try to minimize it. If problems persist, consult the owner’s manual for additional troubleshooting steps.
Software updates for HandsFreeLink are typically performed by the dealership. Contact your Acura dealer to inquire about available updates and schedule an appointment if necessary.
The 2013 Acura TSX Sport Wagon's HandsFreeLink system is primarily designed for phone calls. For playing music, use the auxiliary input or Bluetooth streaming option if available.
Poor call quality could be due to low signal strength, interference, or a malfunctioning microphone. Try moving to an area with better reception and check the microphone for any obstructions.
To switch between paired phones, access the "Phone" menu, then select "Phone Setup" and "Bluetooth Setup." Choose "Select Phone" and select the phone you wish to connect.
The HandsFreeLink system can store pairing information for up to six different phones.
To reset the HandsFreeLink system, press and hold the "Phone" button until you hear a beep. Follow the prompts to access the system settings and select "Factory Reset" to restore the original settings.