Acura TLX Remote Engine Start 2019 Manual
![Acura TLX Remote Engine Start 2019 Sedan manual cover](/images/AHlHfQelfWoxHdpINSlRSxzf/thumbs/thumb175x175.webp)
To activate the remote engine start, press the lock button on the key fob, then press and hold the engine start button within 5 seconds. The engine will start, and the climate control system will activate.
The remote engine start feature on the 2019 Acura TLX has an effective range of approximately 100 feet, depending on environmental conditions and potential obstructions.
Make sure the car is locked and the hood is fully closed. Check the battery in the key fob. If the problem persists, consult the vehicle’s manual or contact a certified Acura technician.
The engine will run for up to 10 minutes when started remotely. You can extend the runtime by an additional 10 minutes by repeating the remote start procedure before the engine shuts off.
No, you need to enter the vehicle, insert the key, and turn it to the 'on' position before driving. The remote start is intended for pre-conditioning the car only.
Yes, the system is designed to work in a variety of weather conditions, automatically adjusting the climate control to heat or cool the cabin as needed.
To cancel the remote engine start, press and hold the engine start button on the key fob for about 2 seconds. This will stop the engine immediately.
The remote engine start may not function if the fuel level is critically low. It's recommended to ensure adequate fuel levels before using this feature.
The remote engine start uses minimal battery power and is designed not to drain the car's battery. However, frequent use without driving the vehicle at regular intervals may affect battery life.
It is not recommended to use the remote engine start in an enclosed space like a garage due to the risk of carbon monoxide buildup. Always ensure proper ventilation.