Acura TLX Remote Engine Start 2018 Manual
![Acura TLX Remote Engine Start 2018 Sedan manual cover](/images/ybuagYoJZedObZmbwtppsEid/thumbs/thumb175x175.webp)
To use the remote engine start on your 2018 Acura TLX Sedan, press the lock button on your key fob, then press and hold the engine start button until the engine starts. This should take about 5 seconds.
The effective range of the remote engine start for the Acura TLX is approximately 100 feet, though this can vary depending on environmental conditions and obstructions.
If your remote engine start is not working, check that your key fob battery is not dead, the car is in park, all doors are closed, and that the hood and trunk are properly latched.
Yes, you can extend the runtime by repeating the remote start procedure once before the initial 10-minute period ends, which will add another 10 minutes.
The remote engine start should work in most weather conditions, but extreme cold might affect the key fob's battery performance. Ensure your key fob is in good condition.
To turn off the remote engine start, simply press the engine start button on the key fob again, or insert the key into the ignition and turn it to the on position.
Yes, it is safe. The car will automatically shut off after a set period if it is not driven, and the doors remain locked until you unlock them with the key fob.
To replace the battery, use a small screwdriver to pry open the key fob, then remove the old battery and replace it with a new CR2032 battery, ensuring the positive side faces up.
Check the key fob battery and replace if necessary. Also, ensure there are no obstructions or interference in the signal path. Consider reprogramming the key fob if issues persist.
Yes, you can install an aftermarket remote engine start system. However, it is recommended to have it installed by a professional to ensure compatibility and avoid voiding warranties.