Acura TLX Personalized Settings 2017 Manual

To customize the driver seat position, use the seat adjustment controls located on the side of the seat. Once adjusted, press and hold the 'SET' button on the door until you hear a beep, then press the corresponding memory button (1 or 2) to save the setting.
If the navigation system is not displaying correctly, try resetting it by pressing the power button for a few seconds. If the issue persists, check for software updates or consult the owner's manual for troubleshooting steps.
To set up Bluetooth, go to the 'Settings' menu on the infotainment screen, select 'Phone', then 'Bluetooth Device List'. Ensure your phone's Bluetooth is turned on and select 'Add Bluetooth Device' to pair.
If climate control settings are not saving, ensure that the vehicle is in the 'ON' mode when adjusting settings. Additionally, check if there is a software update available that might resolve this issue.
To adjust ambient lighting, navigate to the 'Settings' menu on the infotainment screen, select 'Vehicle', then 'Lighting Setup'. From there, you can customize the ambient lighting preferences.
To reset the maintenance minder, turn the ignition to the 'ON' position, press the 'Select/Reset' knob until the oil life is displayed, then press and hold the knob until the oil life resets to 100%.
To enable or disable walk-away auto lock, go to the 'Settings' menu on the infotainment screen, select 'Vehicle', then 'Door/Window Setup'. From there, you can toggle the walk-away auto lock feature.
If the keyless entry system is not working, check the battery in your key fob and replace it if necessary. Also, ensure there are no other electronic devices interfering with the signal.
To update the software, visit the Acura website to check for available updates. Follow the instructions provided to download and install updates either via USB or by visiting an authorized dealer.
Yes, you can adjust sound settings for different audio sources by selecting 'Audio' on the infotainment screen, then choosing 'Sound Settings'. From here, customize settings such as bass, treble, and balance for each audio source.