Acura TLX Multi-View Rear Camera 2019 Manual
![Acura TLX Multi-View Rear Camera 2019 Sedan manual cover](/images/ARXWICZtxPSsDSyRVYEQgMDt/thumbs/thumb175x175.webp)
To activate the Multi-View Rear Camera, place the gear in reverse. The camera view will automatically display on the infotainment screen.
The Multi-View Rear Camera offers three viewing modes: Normal View, Wide View, and Top-Down View. You can switch between these modes using the on-screen buttons.
To switch between camera views, use the on-screen buttons that appear when the camera is active. Press the respective button for Normal, Wide, or Top-Down View.
The camera lens might be dirty or fogged. Clean the camera lens with a soft, damp cloth. If the issue persists, ensure there is no condensation inside the lens housing.
Check if the infotainment system is powered on and the gear is in reverse. If the problem continues, inspect the camera and wiring for damage, or consult an Acura service center.
The guidelines can be toggled on or off through the settings menu on the infotainment system. Refer to your owner's manual for specific instructions.
Regularly clean the camera lens with a soft, damp cloth. Avoid using abrasive materials. Check for any damage or obstructions to ensure clear visibility.
This could be due to a loose connection or software glitch. Check the camera's connections and restart the infotainment system. If the issue persists, seek professional assistance.
Upgrading the camera system may be possible depending on aftermarket options. Consult with an Acura dealership or a professional installer for recommendations.
A warning message could indicate a malfunction or blockage in the camera system. Check the camera for obstructions and refer to the owner's manual for troubleshooting steps.