Acura TLX Lane Departure Warning System 2015 Manual
![Acura TLX Lane Departure Warning System 2015 Sedan manual cover](/images/MJTnnipcWzqtwgpwdrMCXpRH/thumbs/thumb175x175.webp)
The Lane Departure Warning System is a safety feature in the 2015 Acura TLX that alerts the driver if the vehicle unintentionally begins to drift out of its lane without signaling.
The Lane Departure Warning System is usually activated by default. You can ensure it's on by checking the settings in the vehicle's infotainment system or consulting the owner's manual for specific instructions.
If the system is not working, it could be due to a dirty or obstructed camera, which is located near the rearview mirror, or the system being turned off. Ensure the camera is clean and the system is enabled in the vehicle settings.
If the system gives false warnings, it may need calibration. Ensure the camera is clean and the lane markings on the road are clear. If the issue persists, consult a certified Acura technician.
Yes, the Lane Departure Warning System can be turned off through the vehicle's settings menu. Refer to the owner's manual for detailed instructions on disabling the system.
The system may not function optimally in adverse weather conditions such as heavy rain, snow, or fog as these can obscure the camera's view of lane markings.
The Lane Departure Warning System is designed to assist in highway driving by detecting and alerting the driver to unintentional lane departures, enhancing safety during long trips.
Regularly clean the camera located near the rearview mirror and ensure that the windshield is free of obstructions. Periodically check the system's functionality and consult a technician if issues arise.
The system may not detect lane markings correctly if they are faded, missing, or covered by debris. It also may not function properly on sharp curves or complex road designs.
To test the system, drive on a well-marked road and gently drift towards the lane line without signaling. The system should alert you. If it doesn't, check the settings and clean the camera.