Acura TLX Keyless Access System 2015 Manual

To unlock the doors, have the key fob within range and touch the inside of the front door handle. The doors will automatically unlock when the system detects the key fob nearby.
First, ensure the key fob is within range. Check the fob's battery and replace it if necessary. If the problem persists, consult your vehicle's manual for troubleshooting steps or contact a dealer.
If the key fob battery is dead, hold the fob near the start button and press the brake pedal, then push the start button to start the vehicle.
Yes, you can lock the doors by pressing the lock button located on the front door handle when the key fob is within range.
To replace the battery, open the key fob using a small flathead screwdriver. Remove the old battery and insert a new CR2032 battery, ensuring the positive side faces up.
The car may beep if a door, the trunk, or the hood is not fully closed. Check all openings and ensure they are securely closed before attempting to lock the vehicle again.
To temporarily disable the keyless access system, manually lock the doors using the physical key inside the fob. This will prevent the system from automatically unlocking the doors.
The keyless access system typically works within a range of 32 inches (about 80 cm) from the vehicle.
Yes, electronic devices such as cell phones or other key fobs may interfere with the keyless access signal. Ensure the key fob is not obstructed by such devices.
If the vehicle does not recognize the key fob, check the fob's battery and replace it if necessary. If the issue persists, try using a spare key fob or contact your dealer for assistance.