Acura TLX Dashboard Details 2018 Manual

To reset the maintenance light on an Acura TLX 2018, turn on the ignition, use the steering wheel controls to select 'Maintenance Info' from the multi-information display, and press 'Enter'. Then, select 'Reset' and confirm.
The tire pressure warning light indicates that one or more tires have low pressure. Check all tires and inflate them to the recommended pressure levels found on the driver’s door jamb label.
To connect your smartphone, enable Bluetooth on your device, and then on the dashboard, navigate to 'Settings' > 'Bluetooth/Wi-Fi' > 'Bluetooth Device List' and select 'Add Bluetooth Device'. Follow the prompts to pair your phone.
If the 'Check Engine' light appears, ensure the gas cap is tightly secured. If the light remains, schedule a diagnostic check with a certified Acura technician to identify any underlying issues.
To adjust the dashboard light brightness, use the brightness control knob located to the left of the steering wheel. Rotate it to increase or decrease the illumination level to your preference.
Yes, you can customize the display settings by accessing the 'Settings' menu on the dashboard. From there, navigate to 'Display' and adjust settings like brightness, contrast, and theme as desired.
To set up the navigation system, press the 'Nav' button on the dashboard, input your destination using the touchscreen or voice commands, and select 'Start Route' to begin guidance.
The 'Battery Low' warning indicates that the key fob battery is depleted and needs replacement. Replace the battery with a new CR2032 battery to ensure proper function.
The 'Brake Hold' feature maintains brake pressure when the vehicle is at a complete stop, allowing you to release the brake pedal. To activate, press the 'Brake Hold' button while the car is in drive.
Activate the voice command feature by pressing the 'Talk' button on the steering wheel. Wait for the beep, then speak your command clearly, such as asking for directions or making a call.