Acura TLX Auto Idle Stop 2020 Manual
![Acura TLX Auto Idle Stop 2020 Sedan manual cover](/images/tCDdMCbFYpTEoLuwbjlLfuVn/thumbs/thumb175x175.webp)
The Auto Idle Stop feature automatically shuts off the engine when the vehicle is at a complete stop and the brake pedal is pressed, helping to conserve fuel and reduce emissions. The engine restarts when the brake pedal is released.
Yes, the Auto Idle Stop feature can be disabled by pressing the Auto Idle Stop OFF button located on the center console. The feature will remain disabled until the vehicle is turned off and restarted.
The Auto Idle Stop may not activate due to several conditions: the engine may not be warmed up, the battery charge may be low, the cabin climate control may require the engine to run, or the vehicle is on a steep incline.
The Auto Idle Stop system is designed with a heavy-duty starter and a robust battery to handle frequent starts and stops, so it should not significantly affect battery life under normal conditions.
The Auto Idle Stop system itself does not require specific maintenance, but regular battery checks and ensuring the vehicle's systems are properly maintained can help ensure optimal performance.
If the Auto Idle Stop system malfunctions, check if any dashboard warning lights are on. If the issue persists, consult your Acura dealer for a diagnostic check to identify and resolve the issue.
When the Auto Idle Stop is active, you may notice the tachometer needle move to the "Auto Stop" position, and an indicator light on the dashboard may illuminate to signal the system is engaged.
Yes, using the Auto Idle Stop can improve fuel efficiency by reducing fuel consumption when the vehicle is idling. This feature is particularly beneficial in stop-and-go traffic conditions.
The Auto Idle Stop may not activate in extremely cold or hot temperatures if the climate control system demands high power to maintain cabin comfort.
While the Auto Idle Stop system does not offer customization for its activation conditions, you can choose to enable or disable the system as needed by using the control button on the dashboard.