Acura TLX Adaptive Cruise Control Low-Speed Follow 2020 Manual
![Acura TLX Adaptive Cruise Control with Low-Speed Follow 2020 Sedan manual cover](/images/mtCROlOsfdJswHqrdShneZyB/thumbs/thumb175x175.webp)
To activate the Adaptive Cruise Control with Low-Speed Follow, press the MAIN button on the steering wheel to enable the cruise control system, then press the SET/- button when you reach the desired speed.
Ensure that the distance setting is correctly adjusted using the distance button on the steering wheel. If the issue persists, check for any obstructions on the radar sensor located at the front of the vehicle.
Yes, the Adaptive Cruise Control with Low-Speed Follow is designed to be used in heavy traffic as it can bring the vehicle to a complete stop and resume the set speed when traffic allows.
The Adaptive Cruise Control system may not be available if there is a system malfunction or if certain conditions are not met, such as a low battery charge or issues with the radar sensor. Check your vehicle's manual for specific troubleshooting steps.
To adjust the following distance, press the distance button on the steering wheel. The display will show the current distance setting, which can be adjusted to short, medium, or long.
Regularly clean the radar sensor and camera located at the front of the vehicle to ensure optimal performance. Also, have the system checked during regular vehicle maintenance intervals.
The system may not function optimally in adverse weather conditions such as heavy rain, fog, or snow. It is advisable to manually control the vehicle in such conditions.
Low-Speed Follow allows the vehicle to automatically adjust its speed and maintain a set interval behind the vehicle detected ahead, even bringing your Acura to a complete stop and accelerating again when traffic moves.
If the system deactivates, check for any warning messages on the dashboard. It may be due to environmental conditions or system malfunctions. Refer to the owner’s manual or consult a dealership for assistance.
Yes, you can override the system by pressing the accelerator pedal. The system will resume control when you release the pedal.