Acura TL Tire Pressure Monitoring System 2011 Manual
![Acura TL Tire Pressure Monitoring System 2011 Sedan manual cover](/images/NZJfTpRbzvDQaEeFtbTOZShb/thumbs/thumb175x175.webp)
To reset the TPMS on a 2011 Acura TL, turn the ignition to the ON position without starting the engine. Press and hold the TPMS reset button located below the steering wheel until the TPMS indicator blinks twice. Drive the vehicle for a few miles to allow the system to recalibrate.
If the TPMS warning light remains on after inflating the tires, check each tire’s pressure to ensure they are at the recommended levels. Inspect for any leaks or damage. If the light persists, it might indicate a malfunctioning sensor, and you should consult a professional mechanic.
Yes, you can replace a TPMS sensor yourself, but it requires some mechanical skill. You will need to safely lift the car, remove the tire, and unmount it from the wheel to access the sensor. After installation, the new sensor must be programmed to communicate with the vehicle's computer. A professional may be needed for programming.
TPMS sensors typically last 5-10 years. It's a good idea to check their function during routine tire maintenance. Replace the sensors if they are damaged or if the battery life is exhausted, as they are sealed units and batteries cannot be replaced separately.
A blinking TPMS light indicates a potential malfunction in the system, such as a faulty sensor or communication issue. It is recommended to have the system diagnosed by a professional to identify and correct the problem.
The recommended tire pressure for a 2011 Acura TL is typically 33 psi for both front and rear tires. However, always refer to the sticker inside the driver’s side door jamb for the most accurate information specific to your vehicle.
Yes, extreme temperatures can affect tire pressure, triggering the TPMS light. Cold weather can cause tire pressure to drop, while hot conditions might increase it. Regularly check tire pressures during seasonal changes to ensure they remain within recommended limits.
Ignoring the TPMS warning light can lead to driving on under-inflated or over-inflated tires, which increases the risk of tire wear, reduced fuel efficiency, poor handling, and potentially dangerous driving conditions. It’s crucial to address the warning promptly.
Yes, a TPMS diagnostic tool is required to check the sensors' status, read fault codes, and program new sensors. These tools are typically available at automotive service shops or can be purchased for personal use.
To extend the life of your TPMS sensors, regularly check tire pressures, avoid harsh driving conditions, and have them inspected during routine tire maintenance. Ensure that any tire service is performed by professionals familiar with TPMS systems to avoid sensor damage.