Acura TL Tech Bluetooth HandsFreeLink 2014 Manual
![Acura TL Tech Bluetooth HandsFreeLink 2014 Sedan manual cover](/images/YTRuGDKpgEztKVaelVMFvdJh/thumbs/thumb175x175.webp)
To pair your phone, turn on your vehicle and ensure Bluetooth is enabled on your phone. Press the "Phone" button on the steering wheel, then select "Yes" to connect a phone. Follow the voice prompts and select "HandsFreeLink" on your phone's Bluetooth settings. Enter the provided passcode if prompted.
Ensure Bluetooth is enabled on your phone. If your phone is paired but not connecting, try deleting the device from the HandsFreeLink menu and re-pairing it. Also, check for any software updates on your phone that might resolve compatibility issues.
To clear the device list, press the "Settings" button on the dashboard, select "Phone Settings," then "Bluetooth Device List." Choose "Delete Device" and select the device you want to remove. Confirm when prompted.
Ensure the microphone is not obstructed or damaged. Speak clearly and at a normal volume. If issues persist, try performing a system reset by disconnecting the car battery for a few minutes or consult the owner’s manual for additional troubleshooting steps.
To reset the system, disconnect the vehicle’s battery for about 10 minutes. Reconnect the battery, then start the vehicle. This will reset the HandsFreeLink system to its default settings.
Yes, you can pair multiple phones, but only one phone can be connected at a time. You can switch between paired devices through the Bluetooth settings in the vehicle's infotainment system.
Check the phone’s volume settings and ensure they are not too high. If the problem persists, try pairing the phone again or test with another phone to determine if the issue is with the vehicle or the phone.
Acura does not typically provide software updates for the HandsFreeLink system. However, you can contact an Acura dealership for any available updates or fixes that might resolve specific issues.
Yes, you can use voice commands to send text messages if your phone supports this feature. Use the voice command button and say "Send Text" followed by the recipient's name and message. Ensure your phone is compatible with the system.
During a call, use the volume controls on the steering wheel or the audio system to adjust the call volume. This setting is independent of the radio and media volume levels.