Acura TL Personalized Settings 2011 Manual
![Acura TL Personalized Settings 2011 Sedan manual cover](/images/gRiWDqwpxmxvsAVRMTTQqeyb/thumbs/thumb175x175.webp)
To set up the personalized driver seat position, adjust the seat to your preferred position using the seat controls. Then, press and hold the "SET" button on the driver's door panel until you hear a beep. Immediately press the memory button "1" or "2" to save the position.
If the keyless access system is not working, ensure the key fob battery is not dead. Try replacing the battery. If the issue persists, check for any interference from nearby electronic devices and ensure the vehicle's battery is charged.
To customize the lighting settings, use the Multi-Information Display (MID) controls on the steering wheel. Navigate to the "Settings" menu, then select "Lighting Setup" to adjust features like interior light dimming time and auto headlight sensitivity.
To reset the tire pressure monitoring system, first ensure all tires are inflated to the recommended pressure. Then, drive the vehicle at a speed above 20 mph for at least 30 minutes to allow the system to recalibrate.
Check if the audio system is muted or if the volume is too low. Ensure the system is properly powered by checking the fuse. If the problem persists, try resetting the system by disconnecting the battery for a few minutes.
To change the language settings, use the MID controls on the steering wheel to access the "Settings" menu. From there, navigate to "Language" and select your preferred language from the list.
Regularly clean the sunroof tracks and seals with a damp cloth to prevent debris build-up. Lubricate the tracks with a silicone-based lubricant every six months to ensure smooth operation.
Use the dual-zone automatic climate control system to set preferred temperatures for the driver and passenger sides. Adjust fan speed and airflow direction using the physical controls on the dashboard.
Ensure Bluetooth is enabled on your phone and that it is in discoverable mode. Delete any previous pairings on both the car and the phone, then re-pair the devices following the instructions in the owner's manual.
To perform a system check, use an OBD-II scanner connected to the diagnostic port under the dashboard. Follow the scanner's instructions to read any stored error codes and diagnose potential issues.