Acura TL Overhead Controls 2012 Manual
![Acura TL Overhead Controls 2012 Sedan manual cover](/images/cWVBmJEnPhVumUDDNyEWySsB/thumbs/thumb175x175.webp)
To reset the sunroof, press and hold the tilt switch until the sunroof tilts up, then closes completely. Release the switch and check if the sunroof operates normally.
Check if the overhead light switch is set to the 'door' position. If it still doesn't work, inspect the fuse box for any blown fuses related to the interior lights.
Press and hold the desired HomeLink button and the remote control button simultaneously until the HomeLink indicator light changes from slow to fast blinking. This indicates successful programming.
The grinding noise may be due to debris in the track or lack of lubrication. Clean the sunroof tracks and apply a silicone-based lubricant. If the noise persists, consult a professional.
Yes, you can replace the overhead light bulbs with compatible LED bulbs. Ensure the LED bulbs fit properly and maintain the same voltage rating to avoid electrical issues.
Locate the sunroof motor access panel in the headliner. Use the provided hex wrench to manually turn the motor and close the sunroof. Refer to the owner's manual for detailed instructions.
The sensitivity of the automatic headlights is generally fixed. However, ensure the sensor on the dashboard is clean and unobstructed. If issues persist, consult a dealership for further adjustments.
Ensure the garage door opener is compatible with HomeLink. Clear existing codes by holding the first and third HomeLink buttons until the indicator blinks rapidly, then reattempt programming.
Unresponsive buttons may be due to a blown fuse or a loose connection in the wiring harness. Check the fuse box and inspect the wiring for any visible issues.
Ensure the map light switches are in the correct position. Replace any burnt-out bulbs and clean the lens to improve light dispersion. Consider upgrading to LED bulbs for better illumination.