Acura TL Note Function 2012 Manual

To pair your phone, first ensure Bluetooth is enabled on your device. In your Acura TL, go to the Bluetooth settings on the infotainment display, select 'Add New Device', and follow the prompts to complete pairing.
The recommended engine oil for the 2012 Acura TL is 5W-20. Always refer to the owner's manual for specific oil grade and specifications.
To reset the maintenance light, turn the ignition to the 'ON' position, press the 'SEL/RESET' button until the oil life appears, then hold the button for 10 seconds until the oil life begins to blink. Release and hold again for 5 seconds until the oil life resets to 100%.
The recommended tire pressure for the 2012 Acura TL is typically 32 psi for both front and rear tires. Always check the placard located on the driver’s side door jamb for specific information.
Common causes of battery drain include leaving lights on, electronic devices plugged in, or a failing alternator. It is recommended to check these components and consult a mechanic if the issue persists.
To replace the cabin air filter, open the glove box, remove the support arm, unclip the side stops, and lower the glove box. Remove the filter cover, slide out the old filter, and replace it with a new one. Reassemble in reverse order.
If the navigation system is not working, try restarting the vehicle and checking the fuses. If the problem persists, a software update or a visit to the dealership may be necessary.
It is generally recommended to change the transmission fluid every 30,000 to 60,000 miles. Refer to the owner's manual for specific intervals based on driving conditions.
To jump-start your Acura TL, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the booster battery. Connect the negative cable to the negative terminal of the booster battery, and the other end to a grounded metal part of the car. Start the assisting vehicle, then try starting your Acura TL.
Rattling noises can be caused by loose components such as heat shields, suspension parts, or exhaust components. Inspect these areas and consult a mechanic for a thorough diagnosis if needed.