Acura TL Dashboard Details 2011 Manual
![Acura TL Dashboard Details 2011 Sedan manual cover](/images/FNnrvCFYmZPkKIkhuzVqvMOg/thumbs/thumb175x175.webp)
To reset the maintenance light on a 2011 Acura TL, turn the ignition to the ON position without starting the engine. Use the INFO button on the steering wheel to navigate to the 'Maintenance Info' screen, then press and hold the SEL/RESET button until the maintenance reset screen appears. Select 'Reset' and confirm your choice.
If the dashboard lights are not working, first check the dashboard light dimmer switch to ensure it's not turned off. Next, inspect the corresponding fuses in the fuse box. If neither of these is the issue, it might be a problem with the dashboard light bulbs or the wiring, which may require professional inspection.
To adjust the brightness of the dashboard lights, locate the dimmer switch on the left side of the dashboard near the steering column. Turn the switch clockwise to increase the brightness and counterclockwise to decrease it.
The VSA (Vehicle Stability Assist) warning light indicates that there may be an issue with the VSA system. This system helps stabilize the vehicle during cornering or if the vehicle turns more or less than desired. If the light stays on, it is advisable to have the system checked by a professional.
To replace a blown fuse, first locate the interior fuse box on the lower left side of the dashboard. Open the fuse box cover and use the diagram on the cover to identify the appropriate fuse. Use the fuse puller tool, if available, to remove the blown fuse and replace it with a new one of the same amperage.
The TPMS (Tire Pressure Monitoring System) light alerts you when one or more of your tires has low pressure. If the light comes on, check the tire pressures and inflate them to the recommended levels. If the light continues to flash, there might be a malfunction in the TPMS system.
If the dashboard clock is not displaying the correct time, it might need to be reset. Refer to the owner's manual for instructions on how to manually adjust the clock settings. If the problem persists, there might be an issue with the clock's power supply or internal mechanism.
To activate the cruise control, press the CRUISE button on the steering wheel to turn on the system. Accelerate to the desired speed, then press the SET/DECEL button to set the cruise control. Adjust the speed with the RES/ACCEL and SET/DECEL buttons as needed.
The check engine light indicates that the vehicle's onboard diagnostics system has detected a problem with the engine or emissions control system. A diagnostic scan tool can be used to retrieve the error code and determine the issue. It's recommended to have the vehicle inspected by a professional if the light stays on.
To connect your phone via Bluetooth, ensure the phone's Bluetooth is turned on. Press the PHONE button on the dashboard, then select 'Phone Setup' and 'Add New Device'. Follow the prompts on the screen and on your phone to pair the devices. Confirm the connection when prompted.