Acura TL Bluetooth HandsFreeLink 2011 Manual
![Acura TL Bluetooth HandsFreeLink 2011 Sedan manual cover](/images/vdqmUDxTJwOJIkjutcMXshYq/thumbs/thumb175x175.webp)
To pair your phone, ensure Bluetooth is enabled on your phone. Press the "Talk" button on the steering wheel, then say "Phone Setup" followed by "Pair". Follow the voice prompts and enter the pairing code shown on the car display into your phone.
Ensure that Bluetooth is enabled on your phone and that it is within range. If the problem persists, try deleting the device from the HandsFreeLink and re-pairing it. Also, check if your phone's software is up to date.
Press the "Talk" button and say "Phone Setup". Then say "Delete" and follow the prompts to select the phone you want to delete from the system.
Yes, you can pair multiple phones, but only one phone can be actively connected at a time. To switch between phones, use the "Phone Setup" menu to select the desired phone.
Check for any software updates for your phone that might improve Bluetooth performance. Additionally, ensure there are no obstructions or electronic devices causing interference within the vehicle.
To reset the HandsFreeLink system, press the "Talk" button, say "Phone Setup", then "System Clear" and confirm the reset. This will delete all paired devices and settings.
Ensure that the microphone is not obstructed or damaged. Speak clearly and ensure there is minimal background noise. If the issue persists, a software update might be necessary.
Yes, press the "Talk" button and say "Call" followed by the contact name as stored in your phone. Ensure the contact name is pronounced clearly for accurate recognition.
Bluetooth firmware updates are typically available through Acura dealerships. Contact your local dealer for assistance on updating the HandsFreeLink system.
Yes, adjust the call volume using the volume controls on the steering wheel or the audio system while a call is in progress. Make sure your phone's volume is also turned up.