Acura TL Base Overhead Controls 2013 Manual
![Acura TL Base Overhead Controls 2013 Sedan manual cover](/images/RCMxXEzmBDWRIBowZMXOcLkP/thumbs/thumb175x175.webp)
To reset the sunroof, turn the ignition to ON. Press and hold the sunroof switch to the close position for about 10 seconds until the sunroof tilts up and then back down. Release the switch. This should reset the sunroof's position.
First, check the dome light switch to ensure it is set to the correct position. If the switch is fine, inspect the bulb to see if it needs replacing and check the fuse related to the interior lights.
If the sunroof is stuck, you can manually close it by removing the overhead control panel and using an Allen wrench to turn the manual override screw located on the motor until the sunroof is fully closed.
Flickering map lights can be caused by a loose bulb, corroded contacts, or a failing switch. Check the bulb and contacts for any signs of damage or corrosion, and clean or replace as necessary.
To change the bulb, gently pry the lens cover off the overhead console with a flat tool, then remove the old bulb and replace it with a new one of the same type. Be careful not to damage the lens or console.
If the sunroof controls stop working, it could be due to a blown fuse, a faulty sunroof motor, or a wiring issue. Check the fuse first, then inspect the motor and wiring for any visible issues.
Use a soft, damp cloth to gently wipe the overhead console. Avoid using harsh chemicals or excessive water to prevent damage to the electrical components.
Yes, you can replace the overhead light bulbs with compatible LED bulbs. Ensure the LEDs are of the correct size and voltage to avoid any electrical issues.
If the Homelink system is not responding, try reprogramming the buttons. If it still doesn't work, check the fuse and wiring for any issues. Consult the owner's manual for specific reprogramming instructions.
Regularly clean the sunroof tracks to remove debris and apply a silicone-based lubricant to keep them operating smoothly. Avoid using oil-based lubricants as they can attract dirt and cause blockages.