Acura TL Advance & Tech Overhead Controls 2013 Manual
![Acura TL Advance & Tech Overhead Controls 2013 Sedan manual cover](/images/HDGFWTwEntvndruEpmAeJtYt/thumbs/thumb175x175.webp)
To reset the sunroof, turn the ignition to the ON position. Press and hold the sunroof close button for about 10 seconds until the sunroof cycles through the open and close motions. Release the button once the sunroof is fully closed.
Check the interior light switch located on the overhead console to ensure it is in the correct position. If the lights still do not work, inspect the interior light fuse in the fuse box under the hood or inside the car.
To pair your phone, enable Bluetooth on your phone and press the phone button on the steering wheel. Select 'Yes' to pair a new device and follow the prompts on the vehicle's display to complete the pairing process.
Use a flathead screwdriver to gently pry off the map light cover. Remove the old bulb by pulling it out and insert the new bulb. Test the light before reattaching the cover.
To calibrate the compass, drive your vehicle in two complete circles at less than 5 mph in an open area. The compass will automatically calibrate during this process.
Ensure that your garage door opener is compatible with HomeLink. Clear the HomeLink memory by holding the two outer buttons until the indicator light blinks. Then, follow your garage door opener's instructions to program the system.
Use the brightness control knob located on the dashboard. Turn the knob to adjust the brightness to your desired level while the headlights are on.
Check if the dome light switch is set to the 'ON' position. If so, switch it to the 'DOOR' or 'OFF' position. If the problem persists, inspect the door switches for proper operation.
Use a soft, damp cloth with mild soap to gently wipe the buttons. Avoid excessive moisture and do not use harsh chemicals, as this can damage the buttons.
Start by checking the fuse associated with the overhead controls. If the fuse is intact, inspect the wiring harness for any loose connections or damage. If necessary, consult a professional technician for further diagnosis.