Acura RLX Walk Away Auto Lock 2019 Manual

To activate the Walk Away Auto Lock feature, ensure that your vehicle is in the Park position. Then, access the vehicle settings on the infotainment screen, navigate to the 'Vehicle Settings' menu, and select 'Door/Window Setup.' Enable the 'Walk Away Auto Lock' option.
First, ensure that the feature is enabled in the vehicle settings. Check that all doors, including the trunk, are properly closed. If it still doesn't work, try replacing the battery in your key fob, as a weak signal can affect the feature.
Yes, to temporarily disable the Walk Away Auto Lock, you can either turn it off from the vehicle settings menu or manually lock the doors using the key fob after exiting the vehicle.
No, the Walk Away Auto Lock feature will not activate if the keys are detected inside the vehicle to prevent you from being locked out.
The feature activates when the key fob is approximately 5 feet away from the vehicle. However, this distance may vary slightly depending on the environment and other electronic interference.
After walking away, you will hear a beep and see the hazard lights flash once to confirm that the doors have been locked.
No, the Walk Away Auto Lock feature locks all doors simultaneously for security reasons and cannot be customized to lock specific doors.
The Walk Away Auto Lock feature uses minimal battery power from the key fob. However, frequent use may slightly reduce the battery life compared to manual locking methods.
Yes, the feature should work in a crowded parking area, but it is essential to ensure that there are no obstructions blocking the key fob's signal to the vehicle.
Yes, environmental factors such as interference from other electronic devices, extreme weather conditions, or physical obstructions can potentially affect the functionality of the Walk Away Auto Lock.