Acura RLX Sport Hybrid Personalized Settings 2020 Manual
![Acura RLX Sport Hybrid Personalized Settings 2020 Sedan manual cover](/images/cqsKubcLJNhWEKlNRQXaIUrA/thumbs/thumb175x175.webp)
To adjust the driver seat memory settings, first, adjust the seat to your desired position. Then, press the "SET" button located on the driver’s door. Within five seconds, press one of the memory buttons (1 or 2) until you hear a beep, confirming the setting is saved.
If the infotainment system is unresponsive, try performing a soft reset by pressing and holding the power button for about 10 seconds until the system restarts. If the issue persists, check for software updates or consult a dealer.
To customize ambient lighting, access the vehicle settings through the infotainment system. Navigate to 'Settings', then 'Lighting', and select 'Ambient Lighting'. From there, you can choose your preferred color and brightness level.
Ensure your smartphone’s Bluetooth is turned on. On the vehicle’s infotainment screen, go to 'Settings' > 'Bluetooth/Wireless', and select 'Add Device'. Follow the prompts to complete the pairing process.
Refer to the owner's manual for the maintenance schedule. Typically, regular service includes oil changes every 7,500 miles, tire rotations, and inspections of brakes, fluids, and battery as recommended.
If the adaptive cruise control is not functioning, ensure the system is enabled and the sensors are clean. Restart the vehicle to reset the system. If problems continue, seek assistance from an authorized dealer.
To enable lane-keeping assist, press the 'LKAS' button located on the steering wheel. Ensure the system is turned on in the vehicle settings menu, and that road conditions are suitable for its operation.
Check the air pressure in all tires and inflate them to the recommended levels found in the owner’s manual or on the driver’s door jamb. If the light remains on after adjusting tire pressure, consult a professional for further diagnosis.
To update navigation maps, visit the Acura website to download the latest updates onto a USB drive. Insert the USB into the vehicle’s port and follow the on-screen instructions to complete the update process.
Locate the cabin air filter behind the glove box. Open the glove box, remove the damper, and unclip the glove box from its hinges. Slide out the old filter and insert a new one, ensuring the airflow direction is correct. Reassemble the glove box.