Acura RLX Sport Hybrid Maintenance Minder 2019 Manual

To reset the Maintenance Minder, turn on the ignition without starting the engine. Use the steering wheel controls to navigate to the 'Maintenance Info' screen. Press and hold the 'Select/Reset' button until the maintenance item you want to reset starts blinking. Then press the 'Select/Reset' button again to reset it.
The Maintenance Minder Code A1 indicates that it's time to replace the engine oil and rotate the tires. This helps maintain optimal vehicle performance and tire longevity.
The transmission fluid in your 2019 Acura RLX Sport Hybrid should be changed every 30,000 to 60,000 miles, depending on driving conditions. Refer to the owner's manual for specific recommendations.
The recommended tire pressure for the Acura RLX Sport Hybrid is typically 33 psi for both front and rear tires. Always refer to the sticker on the driver's side door jamb for the most accurate information.
Yes, synthetic oil can be used in your Acura RLX Sport Hybrid. It is often recommended due to its ability to provide better protection and performance, especially in extreme temperatures. Ensure the oil meets the specifications outlined in the owner's manual.
To troubleshoot a Check Engine light, use an OBD-II scanner to retrieve the error codes from your vehicle's computer. These codes will help identify the issue. Once you have the codes, refer to the service manual or consult a professional mechanic for further diagnosis.
If the key fob battery dies, you can still start the vehicle by holding the fob close to the start/stop button while pressing the brake pedal. Replace the battery as soon as possible by using a small screwdriver to open the fob and replace the old battery with a new CR2032 battery.
To maintain the hybrid battery, ensure regular maintenance checks are performed at an authorized service center. Avoid exposing the vehicle to extreme temperatures and try to drive the vehicle regularly to keep the battery in good condition.
To check the engine oil level, ensure the vehicle is on a level surface and the engine is cool. Remove the dipstick, wipe it clean, reinsert it fully, and then remove it again to check the oil level against the marked indicators. Add oil if necessary, ensuring not to overfill.
To replace a headlight bulb, turn off the vehicle and open the hood. Locate the back of the headlight assembly, twist and remove the bulb socket, and replace the old bulb with a new one. Ensure the new bulb is secured properly before reassembling. Consult the owner's manual for specific instructions.