Acura RLX Sport Hybrid Keyless Access System 2019 Manual
![Acura RLX Sport Hybrid Keyless Access System 2019 Sedan manual cover](/images/hcDFiOLQMVgXYSPhIYZSIDnf/thumbs/thumb175x175.webp)
To unlock your Acura RLX Sport Hybrid, simply have the key fob within 32 inches of the door handle and touch the inside of the handle. The system will automatically unlock the door.
First, check the battery in your key fob and replace it if necessary. If the problem persists, ensure there is no interference from other electronic devices and consult your owner's manual for further troubleshooting steps.
Yes, place the key fob near the start button and press the button with the brake pedal depressed to start the engine. The proximity sensor will detect the fob and allow you to start the vehicle.
To change the key fob battery, use a small screwdriver to pry open the fob. Replace the old battery with a new CR2032 battery, ensuring the positive side faces up, and snap the fob back together.
Frequent disconnection can be caused by low key fob battery, interference from other devices, or being out of range. Check the battery and ensure no electronic interference.
The keyless access system typically works within a range of 32 inches (about 0.8 meters) from the door handles or trunk.
Consider using a signal-blocking pouch or case for your key fob to prevent relay attacks that can capture the key fob’s signal and unlock your vehicle.
Ensure the key fob is inside the vehicle and try again. If the issue persists, check the key fob battery and consult your dealer if the problem continues.
No, the Acura RLX's keyless access system is designed to prevent locking the key fob inside the vehicle. If the fob is detected inside, the vehicle will not lock.
To reset the system, disconnect the vehicle's battery for a few minutes and reconnect it. This can reset the electronic systems, including the keyless access. If issues persist, contact your dealer.