Acura RLX Sport Hybrid HomeLink 2018 Manual
![Acura RLX Sport Hybrid HomeLink 2018 Sedan manual cover](/images/hccBwtYJpejWFCHfEOyGcxJF/thumbs/thumb175x175.webp)
To program the HomeLink system, press and hold the desired HomeLink button and the remote button simultaneously until the HomeLink indicator light changes from slow to rapidly blinking. This usually takes about 20 seconds.
If the HomeLink system is not working, try reprogramming by clearing the codes first. Hold the outside two buttons until the indicator light blinks, then try programming again. If problems persist, consult your owner's manual or contact a dealer.
Avoid exposing the key fob to extreme temperatures and moisture. If the range decreases, replace the battery with a new CR2032 lithium battery.
It is recommended to follow the Maintenance Minder system in your Acura, which will alert you when service is due. Typically, oil changes should occur every 7,500 miles or 12 months, whichever comes first.
To reset the oil life indicator, turn the ignition to the ON position, use the info button on the steering wheel to navigate to the oil life screen, then press and hold the select/reset button until the oil life resets to 100%.
Acura recommends using SAE 0W-20 viscosity grade oil for the RLX Sport Hybrid for optimal fuel efficiency and performance.
First, try restarting the system by turning the vehicle off and on. Ensure the navigation disc is clean and free from scratches. If issues persist, a hard reset or software update may be required. Consult your dealer for further assistance.
To improve fuel efficiency, maintain proper tire pressure, use the Eco mode for better fuel economy, and avoid rapid acceleration and excessive idling. Regular maintenance also helps.
Locate the fuse box under the dashboard or in the engine compartment. Use the fuse puller to remove the blown fuse and replace it with one of the same rating. Refer to the diagram on the fuse box cover for correct placement.
Enable Bluetooth on your smartphone, then use the infotainment system to search for devices. Select your phone when it appears on the list and follow the prompts to complete pairing.