Acura RLX Personalized Settings 2014 Manual
![Acura RLX Personalized Settings 2014 Sedan manual cover](/images/uXIPJPXQCcwspZlfoVdFcPHs/thumbs/thumb175x175.webp)
To adjust and save your seat position, use the seat adjustment controls located on the side of the driver's seat. Once you find your desired position, press the 'SET' button on the door panel, then press and hold the memory button (1 or 2) until you hear a beep. This saves your preferred seat position.
To customize door lock settings, access the system settings on the central display screen. Navigate to 'Vehicle Settings,' then select 'Door/Window Setup.' From there, you can change settings like auto-lock and auto-unlock based on your preference.
To reset the TPMS on the Acura RLX 2014, ensure all tires are properly inflated. Turn on the ignition without starting the engine. Press the 'TPMS' button located under the dashboard until the TPMS indicator blinks twice. This resets the system.
To update the navigation maps, visit the Acura Navigation website to check for available updates. Purchase the update and follow the instructions provided to install it via USB or DVD, depending on your vehicle's system requirements.
If Bluetooth is not working, first ensure your phone's Bluetooth is turned on and the device is discoverable. In the car, go to 'Settings', then 'Bluetooth,' and ensure it is enabled. Remove any old device pairings and attempt to reconnect your device. If issues persist, try restarting your phone and the vehicle's audio system.
To manually adjust climate control, use the physical buttons and knobs on the center console. Adjust the temperature by turning the temperature knobs and set fan speed with the fan control buttons. You can also select different modes such as 'Auto,' 'Defrost,' or 'Dual' for customized comfort.
To replace the key fob battery, locate the release button on the back of the fob and remove the metal key. Use a small flathead screwdriver to pry open the fob along the seam. Replace the old battery with a new CR2032 battery, ensuring the positive side faces up. Snap the fob back together and reinsert the metal key.
To perform an oil change, first ensure the car is on a stable surface and the engine is cool. Raise the car using a jack and secure it with jack stands. Remove the oil fill cap and place a pan under the oil pan. Unscrew the drain plug and allow the old oil to drain out completely. Replace the drain plug and remove the old oil filter. Install a new filter and add new oil via the oil fill cap. Check oil levels with the dipstick.
To set up Homelink, first clear existing settings by holding the two outer buttons until the indicator light starts flashing. Hold the remote control close to the Homelink buttons and press both the remote button and a chosen Homelink button until the light changes from slow to fast blinking. Test the setup by pressing the Homelink button to ensure it operates the garage door.
Routine maintenance for the Acura RLX 2014 includes regular oil and filter changes, tire rotations and inflation checks, brake inspections, and fluid level checks (coolant, transmission, brake, and power steering fluids). Additionally, inspect belts and hoses for wear and replace the air filter and cabin filter as needed. Follow the maintenance schedule provided in the owner's manual for optimal performance.