Acura RLX Hybrid Tire Pressure Monitoring System 2014 Manual
![Acura RLX Hybrid Tire Pressure Monitoring System 2014 Sedan manual cover](/images/ljyDfHGprXbItGJAbJZZuNlI/thumbs/thumb175x175.webp)
The TPMS in the 2014 Acura RLX Hybrid uses sensors in each tire to monitor air pressure. If the pressure drops below a specified level, the system triggers an alert on the dashboard to inform the driver.
If the TPMS warning light remains on after inflating the tires to the recommended pressure, try driving the vehicle for a few miles to reset the system. If the light persists, there may be an issue with one of the sensors or the system itself, and a professional inspection is recommended.
While it is possible to replace a TPMS sensor yourself, it requires specialized tools and knowledge. It's generally recommended to have a professional perform this task to ensure correct installation and calibration.
To reset the TPMS, ensure all tires are inflated to the correct pressure. Then, turn the ignition to the "On" position without starting the engine, and press the TPMS reset button (usually located under the dashboard) until the TPMS indicator blinks twice. Drive the vehicle for a short distance to complete the reset process.
The recommended tire pressure for the 2014 Acura RLX Hybrid is typically 33 psi for the front tires and 33 psi for the rear tires. However, it's always best to check the placard on the driver's side door jamb for the most accurate information.
In cold weather, tire pressure can drop as the air inside contracts, which may cause the TPMS light to activate. Check and adjust your tire pressures as needed, ensuring they are at the recommended levels.
TPMS sensors typically last 5 to 10 years, or about 100,000 miles, depending on driving conditions and maintenance practices. If a sensor fails, it will need to be replaced.
Driving with a TPMS light on is not recommended, as it indicates one or more tires are under-inflated, which can lead to reduced fuel efficiency, poor handling, and increased risk of tire failure. Check and inflate your tires as soon as possible.
If the TPMS light flashes for about a minute before staying solid, it may indicate a malfunction in the TPMS system itself. This could be due to a faulty sensor or communication issue, requiring a professional diagnostic.
Yes, aftermarket wheels can affect the TPMS if they are not compatible with the vehicle's sensors. It's important to ensure that any new wheels are designed to work with the existing TPMS system or have compatible sensors installed.