Acura RLX Dashboard Details 2014 Manual

To reset the maintenance minder on your 2014 Acura RLX, turn the ignition to the 'ON' position without starting the engine. Press the 'Select/Reset' button until the oil life indicator is displayed. Hold down the 'Select/Reset' button for about 10 seconds until the indicator starts blinking, then release. Press and hold the button again for about 5 seconds until the oil life resets to 100%.
The exclamation mark inside a triangle is the Master Warning Light. It indicates a potential issue with the vehicle's system that requires attention. Check the Multi-Information Display for specific information or messages that highlight the issue.
To adjust the dashboard light brightness on your 2014 Acura RLX, locate the brightness control knob to the left of the steering wheel. Turn the knob clockwise to increase brightness and counterclockwise to decrease it.
The 'Check Engine Light' on your Acura RLX dashboard indicates that the vehicle's onboard diagnostics system has detected a problem with the engine or emissions system. It is recommended to have the vehicle scanned for error codes to identify the specific issue.
To connect your phone via Bluetooth, ensure Bluetooth is activated on your phone. Press the 'Phone' button on the dashboard, then select 'Connect' from the menu. Choose 'Add Bluetooth Device', and follow the prompts to pair your phone with the system.
If the dashboard display is not working, check the vehicle's fuses to ensure none are blown. Refer to the owner’s manual for the fuse box location and details. If the fuses are intact, consider a system reset or consult a professional technician for further diagnosis.
To update the navigation system on your 2014 Acura RLX, visit the official Acura navigation update website. Purchase the latest map update, and follow the instructions provided to install it using a USB drive or SD card as per the vehicle's requirements.
The TPMS warning light indicates that one or more tires may be under-inflated. Check the tire pressures with a gauge and inflate them to the recommended levels stated in the owner's manual or on the driver's side door jamb.
To enable cruise control, press the 'CRUISE' button on the steering wheel. Accelerate to your desired speed, then press the 'SET' button to activate it. Adjust your speed using the 'RES/ACCEL' or 'DECEL/SET' buttons as needed.
If the speedometer is not working, it could be due to a faulty speed sensor, wiring issues, or a malfunctioning gauge cluster. It is advisable to have a diagnostic test conducted by a professional technician to pinpoint and resolve the issue.