Acura RDX Wipers 2021 Manual
![Acura RDX Wipers 2021 SUV manual cover](/images/YRQkPHOEEBPMHYetsulijxSc/thumbs/thumb175x175.webp)
To replace the wiper blades, lift the wiper arm away from the windshield, press the release tab on the wiper blade, and slide it off the arm. Then, align the new blade with the arm and slide it into place until it clicks.
The 2021 Acura RDX typically uses a 26-inch wiper blade for the driver's side and a 16-inch blade for the passenger's side. Always check your owner's manual to confirm the correct sizes.
Wiper streaking can occur due to worn blades, dirt on the blades or windshield, or damaged wiper arms. Clean the windshield and blades, and if streaking persists, consider replacing the wiper blades.
Wiper blades should generally be replaced every 6 to 12 months, or as soon as you notice a decrease in performance, such as streaking or skipping.
First, check the wiper fuse and replace it if it's blown. If the fuse is intact, inspect the wiper motor and switch for any signs of failure. If unsure, consult a professional mechanic.
To activate rain-sensing wipers, turn the wiper control stalk to the 'Auto' position. The wipers will automatically adjust their speed based on the amount of rainfall detected.
Yes, winter wiper blades are designed to handle snow and ice better than standard blades. Ensure they fit correctly and follow the manufacturer's installation instructions.
Wiper noise can be caused by hard or damaged rubber, a dirty windshield, or misaligned wiper arms. Clean the windshield and blades, and check for proper alignment. Replace blades if needed.
Use a pin to gently adjust the direction of the spray nozzles. Aim them so that the washer fluid hits the windshield evenly. Be careful not to damage the nozzles while adjusting.
Use a high-quality windshield washer fluid that is rated for your climate. In colder regions, ensure the fluid is formulated to prevent freezing. Avoid using plain water as it can freeze and may not clean effectively.