Acura RDX Wipers 2020 Manual
![Acura RDX Wipers 2020 SUV manual cover](/images/sOTtRrQgyPwLiyOPkpUWgoNq/thumbs/thumb175x175.webp)
To replace the wiper blades on your 2020 Acura RDX, lift the wiper arm away from the windshield, press the release tab on the wiper blade, slide the blade off the arm, and attach the new blade by reversing the process. Ensure it locks securely in place.
The 2020 Acura RDX typically uses a 26-inch wiper blade for the driver's side and a 16-inch blade for the passenger side. Always consult your owner’s manual for confirmation.
If your wiper blades are not functioning properly, check for blown fuses, ensure the wiper motor is operational, and inspect the wiper linkage for any obstructions or damage.
Streaking can occur due to worn-out blades, dirt accumulated on the blade edge, or a dirty windshield. Clean both the blades and windshield, and replace the blades if they appear damaged or worn.
It is recommended to replace the wiper blades every 6 to 12 months, or as soon as you notice reduced visibility due to streaking or skipping.
Use a windshield washer fluid that is suitable for all-season use and is designed to prevent freezing in cold temperatures. Avoid using water as it can freeze and damage the system.
Noisy wipers can be caused by worn blades or a dirty windshield. Clean both surfaces and consider replacing the blades if the noise persists.
To activate the rain-sensing wipers, turn the wiper control to the auto position. The system will automatically adjust the wiper speed based on the intensity of the rain detected.
Wipers stopping mid-swipe could be due to a faulty wiper motor, a problem with the wiper relay, or an obstruction in the wiper linkage. Inspect these components for issues.
To maintain wiper blades, regularly clean them with a damp cloth to remove dirt and debris, check for signs of wear or damage, and store the vehicle in a garage or shaded area to prevent UV damage.