Acura RDX Wiper Control 2015 Manual

To activate the rain-sensing wipers on your 2015 Acura RDX, turn the wiper control lever to the 'AUTO' position. The system will automatically adjust the wiper speed based on the amount of rainfall detected.
If the wipers are not returning to the park position, check for obstructions on the windshield and ensure the wiper arms are not bent. If the problem persists, it may be a sign of a malfunctioning wiper motor or control module.
To adjust the wiper speed on your 2015 Acura RDX, use the wiper control lever. Move it up for faster speeds, and down for slower speeds. The intermittent setting can be adjusted using the dial on the lever.
Squeaking wipers can be caused by dirt or debris on the windshield or wiper blades. Clean both thoroughly. If noise persists, consider replacing the wiper blades as they may be worn out.
It is recommended to replace the wiper blades on your 2015 Acura RDX every 6 to 12 months or as soon as you notice reduced visibility due to streaking or skipping.
To replace the wiper blades on your 2015 Acura RDX, lift the wiper arm away from the windshield, press the release tab on the blade, slide it off the arm, and attach the new blade by sliding it onto the arm until it clicks securely.
If your wipers are not working, check the fuse related to the wiper system. If the fuse is intact, the issue may be with the wiper motor or the control switch, which might require professional diagnosis.
Yes, you can use winter wiper blades on your 2015 Acura RDX. These blades are designed to handle snow and ice better due to their sturdier construction and protective rubber shells.
Wipers stopping mid-cycle could be due to a problem with the wiper motor, a faulty relay, or a control module issue. Check these components, and consult a professional if necessary.
To clean the wiper blades on your 2015 Acura RDX, use a cloth soaked in windshield washer fluid or a mild detergent solution. Run the cloth along the length of the blade to remove dirt and debris.