Acura RDX Seat Mirror Memory Adjustments 2021 Manual

To set the memory for the seat and mirrors, adjust the seat and mirrors to your preferred positions. Press the 'SET' button on the door panel, then press and hold either '1' or '2' until you hear a beep. This saves the settings to the selected memory button.
Ensure that the vehicle is in Park and that you have properly set up the memory settings. If the problem persists, check the fuse related to the seat adjustment system or consult your owner's manual for troubleshooting steps.
For safety reasons, you can only recall the memory settings while the vehicle is in Park or Neutral. It is recommended to adjust these settings when the vehicle is stationary.
The 2021 Acura RDX offers two memory settings for the seat and mirrors, which can be accessed using the '1' and '2' buttons on the driver's door panel.
Yes, if you have enabled the feature in the vehicle settings, the seat and mirrors can automatically adjust to the last used memory position associated with the remote used to unlock the car.
First, check if the mirrors were included in the memory setting. If the issue persists, there may be an electrical issue, and it is recommended to have the system checked by a professional technician.
To reset, simply adjust the seat and mirrors to new positions and save them to a memory button by pressing 'SET' followed by the desired memory button ('1' or '2') until confirmation is heard.
Yes, you can link each memory setting to a specific key fob, allowing different drivers to have their own seat and mirror positions automatically adjusted when they use their key fob.
Go to the vehicle settings menu on the infotainment system, navigate to the door/window setup, and disable the feature that automatically moves the seat and mirrors when unlocking the vehicle.
Yes, you can manually adjust the mirrors at any time using the mirror control switch on the driver's door, even when a memory setting is active.