Acura RDX Remote Engine Start 2020 Manual
![Acura RDX Remote Engine Start 2020 SUV manual cover](/images/LYguqBaKIPLuHsfuZiDzSyNX/thumbs/thumb175x175.webp)
To use the remote engine start, press the lock button on the key fob, then press and hold the engine start button until the engine starts. The vehicle will run for 10 minutes, and the climate control will activate based on the last settings.
First, ensure that the key fob battery is not depleted. Check the vehicle's battery and ensure the doors, hood, and trunk are fully closed. If the issue persists, consult your owner's manual or contact an Acura dealership.
Yes, you can extend the engine run time by an additional 10 minutes. Within the first 10-minute cycle, perform the remote start procedure again to extend the duration.
To stop the engine remotely, press and hold the engine start button on the key fob until the engine turns off.
The remote engine start may not function if the fuel level is critically low. Ensure there is adequate fuel before attempting to use this feature.
For safety reasons, it is not recommended to use the remote engine start feature while the vehicle is in an enclosed space like a garage, as it may lead to carbon monoxide buildup.
The engine will turn off if you unlock the door using the key fob or touch the door handle. To keep the engine running, enter the vehicle and press the brake pedal, then press the start button.
The climate control system will use the settings from the last time the engine was turned off. To change the settings, you must manually adjust them after entering the vehicle.
The heated seats will not automatically turn on with remote engine start. You will need to manually activate them once you enter the vehicle.
The remote engine start function typically works within a range of approximately 100 feet, but this can vary depending on the surrounding environment and potential obstructions.