Acura RDX Power Tailgate 2013 Manual
![Acura RDX Power Tailgate 2013 SUV manual cover](/images/GzzutmQwZVmldyFepWVWcIns/thumbs/thumb175x175.webp)
To reset the power tailgate, disconnect the battery for a few minutes. Reconnect it and the system should reset. You may need to manually open and close the tailgate once to recalibrate.
Check if the battery in the key fob is dead and replace it if necessary. Also, ensure that the power tailgate function is enabled in the vehicle settings.
Inspect the tailgate latch for obstructions. If clear, the motor may be faulty and require professional servicing.
Locate the manual release handle inside the trunk area, usually accessible through a small panel. Pull the handle to release the latch.
Yes, open the tailgate to your desired height, then press and hold the tailgate close button until you hear a beep. This sets the new opening height.
Regularly clean and lubricate the hinges and latch. Check for any electrical issues and ensure the struts are in good condition.
This might indicate weak or failing struts. Inspect them for damage or wear and replace if necessary.
Check the fuse box for any blown fuses related to the tailgate. If the fuse is fine, inspect the wiring for any visible damage.
Yes, you can disable the power function by turning off the power tailgate switch located inside the vehicle.
Obstructions in the tailgate path can cause it to stop. Clear any obstacles and try again. If the issue persists, there may be a sensor or motor fault.