Acura RDX Overhead Controls 2012 Manual
![Acura RDX Overhead Controls 2012 SUV manual cover](/images/UUfkOObSBcOsxpDQKWbIdWGI/thumbs/thumb175x175.webp)
To reset the sunroof on your 2012 Acura RDX, turn the ignition to the ON position, close the sunroof completely, and then hold the tilt button for about 10 seconds until the sunroof starts to move. Release the button once the initial movement stops.
Check the overhead control switch to ensure it is in the 'DOOR' position. If the lights still won't turn off, inspect the door switches for any damage or obstruction.
To replace a map light bulb, use a flathead screwdriver to carefully pry out the lens cover. Remove the old bulb and insert a new one of the same type. Snap the lens cover back into place.
A grinding noise may indicate debris in the sunroof tracks or a lack of lubrication. Clean the tracks and apply a silicone-based lubricant. If the noise persists, consult a professional technician.
Check the fuse related to the sunroof circuit in the fuse box. If the fuse is intact, inspect the switch for any visible damage or loose connections.
Locate the manual sunroof crank tool in the vehicle's toolkit. Remove the sunroof motor cover and insert the tool into the motor shaft. Turn the tool clockwise to close the sunroof manually.
Use a soft, damp cloth with mild soap to gently clean the buttons. Avoid excessive moisture and ensure the cloth is not dripping wet to prevent electrical damage.
This issue might be due to a malfunctioning sunroof switch or a fault in the electrical system. Inspect the switch for any sticking or damage, and consider having an electrician check the wiring.
The sensitivity is typically adjusted via the wiper control stalk. Rotate the ring on the stalk to increase or decrease sensitivity. Consult the owner’s manual for specific instructions related to your model.
Yes, you can install a roof rack, but ensure it is compatible with your vehicle model. Proper installation should not interfere with the sunroof's operation. Follow the manufacturer's instructions for installation.