Acura RDX Lane Keeping Assist System 2022 Manual

To activate the Lane Keeping Assist System, press the LKAS button located on the steering wheel. Once activated, the system will display an indicator on the instrument panel. Ensure the vehicle speed is above 45 mph for the system to function.
Ensure that the lane markings are visible and not faded. The system may not function properly in poor weather conditions or if the camera view is obstructed by dirt. Clean the windshield and ensure the camera's view is unobstructed.
The Lane Keeping Assist System is designed primarily for use on highways and may not function optimally on winding roads. Always maintain control of the vehicle and be prepared to take over steering.
To deactivate the Lane Keeping Assist System, press the LKAS button on the steering wheel again. The indicator light on the instrument panel will turn off, signaling that the system is deactivated.
The warning indicates that the Lane Keeping Assist System has detected a potential issue. Check if the camera is obstructed or if the lane markings are unclear. If the issue persists, consult your Acura dealership for assistance.
The Lane Keeping Assist System is active at speeds above 45 mph. It is primarily designed for highway driving and may not engage at lower speeds.
Regularly clean the windshield to ensure the camera's view is unobstructed. Have the system inspected during routine service visits to ensure all components are functioning correctly.
Yes, the Lane Keeping Assist System can be used alongside other driver assistance systems like Adaptive Cruise Control to enhance driving safety and convenience.
The system may not provide steering input if lane markings are not detected or if the vehicle speed is below the operational threshold. Ensure that you are driving on a road with clear lane markings and at the appropriate speed.
No, the Lane Keeping Assist System is meant to assist and not replace active steering. Always keep your hands on the wheel and be prepared to take control of the vehicle.