Acura RDX Lane Keeping Assist System 2016 Manual

To activate the LKAS, press the "LKAS" button located on the steering wheel. Ensure the vehicle is traveling above 45 mph and lane markings are clearly visible.
Ensure that the camera located near the rearview mirror is not obstructed by dirt or debris. Clean the windshield and make sure the lanes are clearly visible.
No, the LKAS is designed to assist the driver, not replace them. You should always keep your hands on the steering wheel and remain attentive to the road.
The LKAS may turn off if the lane markings are not detected, if the vehicle speed drops below 45 mph, or if the steering wheel is not held for a certain period.
Currently, the 2016 Acura RDX does not offer an option to manually adjust LKAS sensitivity. It is pre-configured for optimal performance.
Regularly clean the windshield and ensure the camera is unobstructed. Have the system checked by a professional if any warning lights appear.
The LKAS can be deactivated by pressing the "LKAS" button. However, it will reset to active when the vehicle is restarted.
The LKAS warning light indicates a potential issue with the system. Check for obstructions on the windshield and consult a dealer if the light persists.
LKAS may not function properly in adverse weather conditions such as heavy rain, fog, or snow, as these can obscure lane markings.
The system will issue visual and audible alerts if it cannot detect lane markings or if the driver needs to take over steering.