Acura RDX Keyless Access System 2023 Manual
![Acura RDX Keyless Access System 2023 SUV manual cover](/images/uIOhyPKZLEeljCJBGcmXVzyN/thumbs/thumb175x175.webp)
To lock the vehicle, press the lock button on the door handle once. To unlock, simply place your hand inside the door handle. Ensure that the key fob is within range for these functions to work.
First, check the battery of your key fob. If the battery is fine, attempt to reinitialize the system by unlocking the driver's door manually using the physical key.
Yes, as long as the key fob is inside the vehicle, press the brake pedal and push the START/STOP button to start the engine.
To change the battery, open the key fob case using a small screwdriver. Remove the old battery and insert a new CR2032 battery with the positive side facing up.
If the battery dies while driving, the vehicle will continue to operate normally. However, you will need to replace the battery to use the Keyless Access features once the vehicle is turned off.
To disable the Keyless Access System, you can turn off the smart entry feature within the vehicle settings menu on the infotainment system.
The typical range is approximately 32 inches (80 cm) from the vehicle. The key fob must be within this range for the Keyless Access System to function.
If the key fob is detected inside the vehicle, the doors will not lock. If they do lock, you may need to use a spare key or contact a locksmith.
Check for interference from other electronic devices, ensure the key fob battery is charged, and verify the system settings in the infotainment system are correct.
Yes, if the key fob fails, you can hold the fob near the START/STOP button while pressing the brake pedal to start the vehicle.