Acura RDX Blind Spot Information System 2021 Manual

Acura RDX Blind Spot Information System 2021 SUV manual cover
Pages 3
Year 2021
Language(s)
English en

Acura RDX Blind Spot Information System 2021 SUV Specification

The 2021 Acura RDX is equipped with a sophisticated Blind Spot Information (BSI) System, designed to enhance driver awareness and safety. This advanced system utilizes radar sensors positioned on both sides of the rear bumper to monitor the presence of vehicles in the driver's blind spots. When a vehicle is detected in an adjacent lane, the BSI system activates a visual alert on the corresponding side mirror.

The system operates at speeds above 20 mph, ensuring its functionality during typical driving conditions. It provides timely warnings without overwhelming the driver, integrating seamlessly with the vehicle's overall safety suite. The radar sensors have a considerable detection range, allowing the system to recognize vehicles approaching at high speeds.

In addition to visual alerts, the BSI system works in conjunction with other driver-assist features. For instance, it complements the Rear Cross Traffic Monitor, which uses similar radar technology to detect approaching vehicles when reversing and provides both visual and auditory alerts to prevent collisions.

The BSI system's integration with the 2021 Acura RDX's infotainment and driver assistance technologies underscores Acura's commitment to safety and driver confidence. The system is a part of Acura's AcuraWatch™ suite, which includes other advanced safety features such as Collision Mitigation Braking System™ (CMBS™), Adaptive Cruise Control (ACC), and Lane Keeping Assist System (LKAS).

Overall, the Blind Spot Information System in the 2021 Acura RDX exemplifies cutting-edge automotive safety technology, offering drivers enhanced situational awareness and contributing to a safer driving experience.

Acura RDX Blind Spot Information System 2021 SUV F.A.Q.

How do I activate the Blind Spot Information System on the 2021 Acura RDX?

The Blind Spot Information System (BSI) is typically activated when you start the vehicle. Ensure that the system is turned on via the settings menu in the infotainment system. The system uses sensors located on the rear bumper to detect vehicles in your blind spots.

What does the Blind Spot Information System warning light look like?

The Blind Spot Information System warning light is usually an icon of two cars side by side, often located on the side mirrors. When the system detects a vehicle in your blind spot, the light will illuminate.

Why is the Blind Spot Information System not working on my Acura RDX?

If the BSI is not working, check if the system is turned on in the vehicle settings. Also, ensure that the sensors on the rear bumper are clean and not obstructed. If issues persist, consult your Acura dealership for a diagnostic check.

How can I test if the Blind Spot Information System is functioning correctly?

To test the system, drive alongside another vehicle in an adjacent lane. The BSI warning light should illuminate when the vehicle enters your blind spot. Ensure the system is enabled and check in a safe and controlled environment.

Can the Blind Spot Information System be turned off manually?

Yes, the Blind Spot Information System can be turned off manually through the vehicle settings in the infotainment system. Navigate to the safety features section and toggle the BSI setting.

What should I do if the Blind Spot Information System warning light stays on?

If the BSI warning light remains on continuously, it may indicate a system malfunction. Ensure that the sensors are clean and free from obstruction. If the issue persists, it is advisable to have the system inspected by an authorized Acura technician.

Does the Blind Spot Information System work in all driving conditions?

The BSI is designed to work in most driving conditions but can be affected by heavy rain, snow, or ice, which can obstruct the sensors. It is important to manually check blind spots in adverse weather conditions.

How often should I clean the sensors for the Blind Spot Information System?

It is recommended to clean the sensors regularly, especially during winter or after driving on muddy or dusty roads. A clean, soft cloth with mild soap and water can be used to gently clean the sensor area on the rear bumper.

What does it mean if the system displays an error message?

An error message may indicate that the system sensors are blocked or malfunctioning. Check for dirt, ice, or other obstructions on the sensors. If the error persists, consult your Acura dealer for further diagnosis.

Can the Blind Spot Information System detect all objects in the blind spot?

The BSI is primarily designed to detect moving vehicles. It may not detect small objects, pedestrians, or stationary vehicles. Always perform a visual check of your blind spot for complete safety.