Acura RDX AcuraWatch 2022 Manual
![Acura RDX AcuraWatch 2022 SUV manual cover](/images/qDVNbWkNplmHYHWqIWjiRFaT/thumbs/thumb175x175.webp)
To activate Adaptive Cruise Control, press the MAIN button on the steering wheel to enable the system. Then, press the SET/- button when you reach your desired speed. Adjust the following distance by pressing the interval button.
If the CMBS warning light appears, it indicates a potential issue with the system. Check if the radar sensor is obstructed or dirty. If the problem persists, contact your Acura dealer for a diagnostic check.
The LKAS sensitivity is preset and cannot be adjusted by the user. However, you can activate or deactivate the system using the LKAS button on the steering wheel.
Regularly clean the front grille and windshield where sensors and cameras are located. Ensure that the software is up to date by visiting your Acura dealer for scheduled maintenance.
The system may not work effectively if road markings are faded or unclear, during adverse weather conditions, or if the sensors are dirty. Ensure sensors are clean and consider environmental factors.
To temporarily disable AcuraWatch features, press the MAIN button on the steering wheel until the systems are turned off. Note that disabling these systems can reduce driving assistance.
The FCW system alerts you when a potential collision is detected. You can adjust its alert timing in the vehicle settings menu under Driver Assist System Setup.
When the TSR system functions properly, traffic signs will be displayed on your instrument panel. If signs are not displaying, check for obstructions on the camera or visit your dealer.
Some AcuraWatch features, such as Adaptive Cruise Control and Lane Keeping Assist, may be less effective or deactivated while towing. Refer to the owner's manual for specific towing guidelines.
If the system fails to initialize, ensure that the sensors and cameras are clean and unobstructed. If the issue persists, contact your Acura dealer for further assistance.