Acura NSX HD Radio 2018 Manual

To set up the HD Radio on your 2018 Acura NSX, access the audio system settings through the infotainment display. Select the radio option and tune to a station that supports HD Radio. The system will automatically switch to the HD version if available.
HD Radio signals can fade due to weak signal strength or interference. Ensure that you are within the broadcast range of the station and check for any obstructions that may block the signal, such as tall buildings or dense foliage.
Yes, you can manually switch between HD and analog modes. Go to the radio settings on your infotainment system and select the option to disable or enable the HD Radio feature as needed.
If song information is not displaying, ensure that the feature is enabled in the radio settings. Also, verify that the station you are tuned to broadcasts song metadata. If the issue persists, restart the infotainment system.
To improve HD Radio reception, ensure your antenna is fully extended and unobstructed. Avoid parking in covered areas and try to maintain a clear line of sight to the broadcast tower.
The HD Radio system in the Acura NSX generally requires minimal maintenance. Keeping the software updated through regular vehicle maintenance checks will ensure optimal performance.
Yes, it is normal for HD Radio to take a few seconds to acquire the signal and switch from analog to HD. This brief delay is due to the time needed to decode the digital signal.
To update the HD Radio software, check for updates via the AcuraLink system if available. You can also visit your dealership for software updates during regular service appointments.
Yes, the 2018 Acura NSX supports multicast HD Radio channels. You can access these additional channels by tuning past the main station frequency on the infotainment system.
If the audio quality is poor, check if the station has a strong signal and that the antenna is not obstructed. Verify that the audio settings on the infotainment system are correctly configured for optimal sound.