Acura NSX Dashboard Details 2019 Manual

To reset the maintenance light on your 2019 Acura NSX, turn the ignition to the "ON" position, press the "SEL/RESET" button on the steering wheel repeatedly until the oil life is displayed, then press and hold the "SEL/RESET" button until the oil life reset mode appears. Use the arrow buttons to select "Reset" and press "SEL/RESET" again to confirm.
The TPMS warning light indicates that one or more of your tires may be significantly underinflated. Check the tire pressures and inflate them to the recommended levels as indicated on the driver's side door jamb placard.
A flashing check engine light typically indicates a misfire or a significant engine problem that requires immediate attention. It's recommended to stop driving the vehicle and have it inspected by a professional technician as soon as possible.
To adjust the dashboard light brightness, use the brightness control knob located on the dashboard near the speedometer. Turn it clockwise to increase brightness and counterclockwise to decrease it.
If the "Brake System" warning appears, it indicates a potential issue with your braking system. Check the brake fluid level and ensure the parking brake is fully released. If the warning persists, have the vehicle inspected by a qualified mechanic immediately.
Flickering dashboard lights may be due to a weak battery, alternator issues, or a loose electrical connection. It's advisable to check the battery terminals for corrosion and ensure the alternator is functioning properly.
To enable cruise control, press the "CRUISE" button on the steering wheel. Accelerate to your desired speed, then press the "SET" button to maintain that speed. Adjust with the "RES/ACCEL" and "DECEL" buttons as needed.
The "VSA" (Vehicle Stability Assist) light indicates that the system is either active or has detected a fault. If the light stays on, it suggests a problem with the system, and you should have it checked by a professional.
While the Acura NSX does not allow for direct oil level checks from the dashboard, you can check the oil level using the dipstick under the hood. Ensure the car is on level ground and the engine is off and cool.
If the airbag warning light remains on, it indicates a fault in the airbag system. This is a critical safety issue, and you should have your vehicle inspected by an authorized Acura technician immediately.