Acura MDX Sport Hybrid Tire Sealant Inflator Kit 2019 Manual

The Tire Sealant and Inflator Kit is used for temporarily sealing small punctures in the tire tread and inflating the tire to an appropriate pressure, allowing you to drive to a nearby service station for a permanent repair.
To use the kit, first remove the valve cap from the punctured tire. Attach the sealant canister to the tire valve and the inflator to the canister. Plug the inflator into the vehicle's power outlet, turn it on, and let it run until the tire reaches the recommended pressure.
No, the kit is only designed for tread punctures. Sidewall punctures require professional assessment and repair.
If the tire does not inflate, check for a larger puncture or damage. The kit is only effective for small punctures. If the issue persists, contact roadside assistance or a professional tire repair service.
It is recommended to drive no more than 50 miles (80 kilometers) on a tire repaired with the kit and to limit speed to 50 mph (80 km/h) until a permanent repair is made.
Yes, the sealant canister is a single-use item and must be replaced after each use to ensure effectiveness in future emergencies.
The kit is designed for standard passenger tires. It may not be suitable for larger tires on vehicles such as trucks or off-road vehicles. Always refer to the vehicle's owner manual for specific guidance.
It is advisable to check the kit every few months to ensure it is in good condition and that the sealant is not expired. Regular checks can prevent issues during emergencies.
The kit is typically stored in the trunk compartment, often underneath the trunk floor panel. Refer to the owner's manual for the exact location.
Ensure the vehicle is parked safely away from traffic, and the engine is turned off before using the kit. Use gloves and eye protection to prevent contact with the sealant. Read all instructions before use.