Acura MDX Sport Hybrid Rain-Sensing Headlight Wipers 2018 Manual
![Acura MDX Sport Hybrid Rain-Sensing and Headlight Integrated Wipers 2018 SUV manual cover](/images/rrKIprxESqqDWpVzsypnffJk/thumbs/thumb175x175.webp)
To activate the rain-sensing wipers, turn the wiper lever to the 'AUTO' position. The system will automatically adjust the wiper speed based on the amount of rainfall detected.
Ensure that the sensor area on the windshield is clean and free from obstructions. Dirt or debris can affect the sensor's ability to detect rain accurately.
Yes, the sensitivity can typically be adjusted using the multi-information display settings. Refer to your owner's manual for specific instructions on changing the settings.
The headlight-integrated wipers automatically activate the headlights when the wipers are in use, enhancing visibility during rain.
Noisy wipers can be due to worn-out wiper blades or debris on the windshield. Inspect the blades for wear and clean the windshield to see if that resolves the issue.
To replace the wiper blades, lift the wiper arms away from the windshield, press the release tab on the blade, and slide it off the arm. Install the new blade by sliding it onto the arm until it clicks into place.
Streaks can occur if the wiper blades are worn or if dirt is present on either the blades or the windshield. Clean both and replace the blades if they appear to be worn out.
It's recommended to use a high-quality windshield washer fluid suitable for all weather conditions to ensure optimal performance and prevent freezing in cold temperatures.
It's a good idea to inspect the wiper blades every six months for any signs of wear or damage, and replace them if necessary to ensure clear visibility.
Check the wiper fuse and replace it if it's blown. If the problem persists, it may be a malfunction with the wiper motor or switch, which should be inspected by a professional technician.