Acura MDX Sport Hybrid Collision Mitigation Braking System 2019 Manual

The CMBS in the 2019 Acura MDX Sport Hybrid uses radar and a forward-facing camera to detect vehicles ahead. If it determines a collision is imminent, it can automatically apply the brakes to reduce the severity of the impact.
Yes, the CMBS can be turned off. This is done by accessing the vehicle settings on the dashboard and navigating to the driver assist system setup, where you can disable the CMBS feature.
If the CMBS light illuminates, it indicates a possible issue with the system. You should check for any obstructions on the sensors and restart the vehicle. If the light persists, contact your Acura dealership for a diagnostic check.
Unexpected activation may occur due to environmental factors such as heavy rain, snow, or fog, where the sensors may misinterpret the surroundings. Ensure the sensors are clean and free from obstructions.
It's recommended to have the CMBS checked during your regular maintenance schedule or if you notice any warning lights or unusual behavior from the system.
Yes, the CMBS is designed to detect not only vehicles but also pedestrians. However, its effectiveness can vary based on speed and environmental conditions.
The CMBS may not perform optimally in certain conditions such as sharp curves, poor weather, or if the sensors are obstructed. It's important to remain attentive and not rely solely on the system.
To clean the CMBS sensors, gently wipe them with a soft cloth and mild detergent. Avoid using high-pressure water or harsh chemicals as they may damage the sensors.
You can check for software updates by contacting your Acura dealership or visiting the official Acura website. Updates may enhance system performance and address known issues.
In the event of a failure to activate, ensure that the system is turned on and the sensors are clean. It’s critical to report the incident to your Acura dealer for a detailed inspection and diagnosis.