Acura MDX Remote Engine Start Vehicle Feedback 2016 Manual

To activate the Remote Engine Start on your 2016 Acura MDX, press the lock button on the key fob, then press and hold the engine start button until the engine starts.
If the Remote Engine Start is not working, ensure the vehicle is locked, the hood is closed, and the key fob battery is not depleted. Also, check if there are any warning lights on the dashboard.
It is recommended not to use Remote Engine Start in an enclosed area like a garage due to the risk of carbon monoxide buildup. Ensure proper ventilation if you must start the engine remotely in a garage.
The typical range for Remote Engine Start is about 100 feet from the vehicle, but this can vary depending on the environment and any physical obstructions.
The engine will run for 10 minutes after being started remotely. If you need additional time, you can repeat the remote start procedure to add another 10 minutes.
Yes, when using Remote Engine Start, the climate control system will activate based on the previous settings to help achieve a comfortable cabin temperature.
If the Remote Engine Start feature malfunctions, check the key fob's battery and vehicle's battery. If the issue persists, consult your Acura dealer for further diagnostics.
Remote Engine Start may not function if the fuel level is critically low to prevent running out of fuel. It's advisable to refuel the vehicle before attempting a remote start.
When the engine starts, the parking lights will flash, and the engine will begin running. You might also hear the engine noise as an auditory confirmation.
Yes, you can disable the Remote Engine Start feature by consulting your owner's manual or having it deactivated by an Acura dealer.