Acura MDX Power Tailgate 2016 Manual
![Acura MDX Power Tailgate 2016 SUV manual cover](/images/jkXfDzJMngapqRmBmCzoNdpg/thumbs/thumb175x175.webp)
To manually open the power tailgate, locate the handle on the tailgate and pull it. If the power feature is not functioning, you can also find the emergency release lever inside the tailgate for manual operation.
First, ensure the vehicle is in Park. Check the tailgate button inside the vehicle and on the remote. Inspect the tailgate for obstructions. If the issue persists, check the fuse related to the power tailgate and consult a technician if needed.
Yes, you can adjust the opening height by manually setting the tailgate to your desired height and then pressing and holding the close button until you hear a beep. This will set the tailgate to open to your specified height each time.
The beeping sound is a safety feature to alert you that the tailgate is in motion. If the beeping continues without motion, check for obstructions or consult your manual for troubleshooting tips.
To reset the power tailgate, ensure the vehicle is parked. Disconnect the negative battery cable for about 10 minutes, then reconnect it. This can reset the electronics, including the tailgate system.
Unexpected closing could be due to a faulty sensor or obstruction detection. Ensure there are no objects blocking the sensors and that the tailgate is properly aligned. If the problem persists, have it checked by a professional.
Yes, you can disable the power feature by turning off the power tailgate switch located on the dashboard. This will allow you to operate the tailgate manually.
Check for any obstructions or debris around the tailgate hinges and struts. Ensure the struts are not damaged or leaking fluid. If everything appears normal, consult a technician for further diagnosis.
Regularly clean the tailgate sensors to ensure proper operation. Inspect the hinges and struts for signs of wear or damage and lubricate them as needed. Ensure all electrical connections are tight and free from corrosion.
Yes, you can open and close the power tailgate using the remote key fob by pressing and holding the tailgate button until the tailgate starts moving. Ensure you are within range of the vehicle when using this feature.