Acura MDX Operating Controls 2011 Manual
![Acura MDX Operating Controls 2011 SUV manual cover](/images/xQkbZpInVSrsPAHSmXvlAPNu/thumbs/thumb175x175.webp)
To pair your phone, ensure Bluetooth is enabled on your phone. Press the "Phone" button on the steering wheel, then select "Phone Setup" on the display. Choose "Bluetooth Setup," then "Add New Device." Follow the prompts to complete the pairing process.
If the navigation system is unresponsive, try restarting the vehicle. If the issue persists, check the system's fuse and ensure it's intact. If necessary, consult the owner's manual or a professional technician.
To adjust seat memory settings, first position the seat as desired. Press and hold the "SET" button on the driver’s door, then press and hold one of the memory buttons (1 or 2) until you hear a beep. This saves the current seat position to that memory setting.
Check if the rearview camera lens is clean and unobstructed. If the problem continues, ensure that the vehicle is in reverse gear and that the camera system is enabled in the settings. If issues persist, consult a technician.
To replace the key fob battery, remove the metal key blade, then use a small flathead screwdriver to gently pry open the key fob along the seam. Replace the old battery with a new CR2032 battery, ensuring the polarity is correct, then snap the fob back together.
To reset the TPMS, ensure the tires are inflated to the correct pressure. Turn the ignition to the "On" position without starting the engine, then hold the TPMS reset button until the TPMS light blinks three times. Drive the vehicle for a few miles to allow the system to recalibrate.
To improve fuel efficiency, maintain regular maintenance, ensure tires are properly inflated, reduce excess weight, and avoid aggressive driving. Additionally, use cruise control on highways and avoid excessive idling.
To set up the HomeLink system, hold the desired HomeLink button and the garage remote simultaneously until the indicator light changes from a slow to a rapid blink. Release both buttons and press the HomeLink button to test. Consult the manual for detailed instructions if needed.
Check if the power tailgate feature is enabled in the settings. Ensure the vehicle is in Park and the battery is charged. If the problem persists, manually open and close the tailgate to reset the system, or consult your dealer for assistance.
To change the headlight bulb, access the back of the headlight assembly from the engine compartment. Remove the dust cover, disconnect the electrical connector, and release the bulb retaining clip. Replace with a new bulb, secure the clip, reconnect the connector, and replace the dust cover.